For the laser with a wavelength in visible and near-infrared light​, the absorption rate of refractive media is low, the transmission rate is high, and the refractive media has a strong focusing ability.

When certain electrons are stimulated, they emit a beam of light. A laser beam is created when a mirror or prism collects this light and points it in one direction. The laser level casts a beam of light, which can be used as a visual chalk line when a straight line and level reference point are needed. The size of the beam depends on the size of the diode.

The dry fire training laser bullet is designed for home shooting practice to response the Laser Trainer Target System. Built to fit inside chamber of pistols, rifles and shotguns, the Dry Fire Laser Bullet simulates the bullet impact with a red laser dot on paper target or laser target. Each time the firing pin strikes the hardened rubber switch; the Laser Trainer Cartridge is activated and light on for 50 milliseconds then off.

Laser at 1064nm is the best wavelength for removing blue and black lip lines because of its strong penetration of skin tissue. The 532nm laser has a shallower penetration depth, which is the strongest absorption of red pigment, so the removal of the red lip liner is the best. However, 532nm wavelength of light will damage normal skin, and lip tissue is thin skin, rich blood vessels,

Laser welding has unique advantages, including low heat input, narrow fusion zone, and heat-affected zone performance so that the weld formed by laser welding is stronger and more attractive, laser welding time is greatly shortened; Laser tracking sensor, can realize automation, reduce product cost. These new technologies have further expanded the application range of laser welding.

The laser linewidth is determined by the quality factor of the resonator, the higher the quality factor of the cavity, the narrower the laser linewidth. After considering the gain of the laser medium, the theoretical limit of the linewidth of the laser is determined by the spontaneous radiation of the gain medium.

dry firing practice is one of the best ways to become a good marksman. dry firing is critical to building muscle memory. dry fire exercises to hone your trigger control.

Because the sensitivity of our eyes peaks near the wavelength of green light, a green laser at 532nm is 5-7x brighter than any other color laser at the same power, and a 500mW green laser will be brighter than a 500mW 445nm blue, 650nm red or 405nm purple laser​. Therefore, a green laser is an ideal light source for outdoor use during daytime when the power exceeds 300mW.

the semiconductor laser is developing in the direction of shorter emission wavelength, larger emission power, ultra-small, and long life, to meet the needs of various applications, the product category is increasingly rich. It has also been widely used in laser processing, 3D printing, lidar, laser ranging, military, medical and life sciences. In addition, high-power direct semiconductor lasers are widely used in cutting and welding fields by coupling into optical fibers for transmission.

The laser display technology, which uses solid-state laser working material pumped by semiconductors and controls the reflection of red, green, and blue laser light ​sources on DMD chip, has become one of the mainstream display technologies in the future and is also the key strategic technology of China's key development.